TB 1-1520-238-20-109
s.
Add new procedure 2.107A., to read as follows:
2.107A. VERTICAL STABILIZER ELASTOMERIC MOUNT
REMOVAL/INSTALLATION
2.107A.1. Description
This task covers: Removal. Cleaning. Inspection. Installation. Corrosion
Prevention.
2.107A.2. Initial Setup
Tools:
Aircraft mechanic's tool kit (item 376, App H)
Electrical tool kit (item 378, App H)
Light duty laboratory apron (item 27, App H)
150 - 750 inch-pound 3/8-inch drive click type torque wrench (item 442, App H)
Materials/Parts:
Antiseize compound (item 26, App F)
Personnel Required:
67R
Attack Helicopter Repairer
68X
Armament/Electrical System Repairer
67R3F
Attack Helicopter Repairer/Technical Inspector
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
2.107
Vertical stabilizer removed
NOTE
This task is typical for the removal and installation of all four
elastomeric mounts.
11