TB 1-2840-248-20-2
6. Assembly Components to be Inspected.
NOMENCLATURE
PART NO.
NSN
Engine, Assembly
6035T00G01
2840-01-070-1003
T700-GE-700
Engine, Assembly
6044T06G01
2840-01-114-2211
T700-GE-701
Engine, Assembly
6071T24G01
2840-01-284-4011
T700-GE-701C
7. Parts to be Inspected. N/A.
8. Inspection Procedures.
a. Locate the engine DA Form 2408-16, engine DA Form 2410, or DA Form 2408-16-1, as applicable, to
determine the total cumulative counts for each engine and all reportable installed subcomponents.
b. Obtain the current history recorder reading from each engine.
9. Correction Procedures.
a. Determine the total cumulative counts for each engine using the current history recorder reading and
existing engine historical records.
b. A one time usage report will be submitted using DA Form 2410. Prepare a Copy 3 of DA Form 2410 for
each engine. Prepare the DA Form 2410 per the instructions in this Technical Bulletin for preparing a Copy 3
installation. Use the current history recorder reading and total cumulative counts when preparing the DA Form
2410. Use failure code "999" in block 10 of the DA Form 2410. If the engine is uninstalled enter "uninstalled"
in block 41 of the DA Form 2410. Mail the DA Form 2410 to Commander, USAATCOM, ATTN: AMSAT-I-MDO
(TACTS), 4300 Goodfellow Blvd., St. Louis, MO 63120-1798.
c. Line out the engine entry on the aircraft condition change DA Form 2408-16 and remove the engine DA
Forms 2408-16, 2408-16-1, or 2408-15 Overprint from the historical records. Retain these engine records for
one year then destroy the form.
3