TB 1-1520-238-20-109
(d) Perform electrical bond check on stabilizer pads (23) and tailboom pads
or elastomeric mounts (24) (TM 55-1500-323-24).
l.
Paragraph 2.107.6.(d)(1). Keep paragraph as follows:
(1) Bond shall be 0.1 OHM or less. Use ohmmeter.
23
24
24
ELASTOMERIC MOUNTS
M04299024
m. Paragraph 2.107.6.e. Change e. and subparagraph (1), to read as follows:
e. Install stabilizer (16) on tailboom (3). Torque four bolts (21) in sequence. Ensure to
identify type of mounts installed (elastomeric or non-elastomeric mounts).
(1) Align four stabilizer lugs (23) over tailboom pads or elastomeric mounts (24).
7
Previous Page
