TB 1-1520-240-20-89
c. If there are any questions or problems, contact the Maintenance Engineering point of contact listed in paragraph
16a below.
10. Supply/Parts and Disposition -
a. Parts Required - The following items will be required to locally manufacture and install the strap assembly -
QUANTITY
PER
NOMENCLATURE
PART NUMBER
NSN
AIRCRAFT
CATCH, CLAMPING
214P8078-6
1
9170-REV J
OR
LATCH ASSEMBLY
H976-7
5340-01-028-0086
1
9170
RIVETS, MONEL, COUN-
MS2042M4-4
A/R
TERSUNK
b. Requisitioning Instructions Requisition replacement parts through normal supply channels using normal supply
procedures. All requisitions shall use project code "XCH" per this TB.
NOTE
Project code "XCH" is required to track and establish a data base of stock fund expenditures
incurred by the field as a result of this TB.
c. Bulk and Consumable Materiels -
QUANTITY
PER
NOMENCLATURE
PART NUMBER
NSN
AIRCRAFT
STAINLESS STEEL, TYPE
AMS 5517
A/R
301, 1/4 HARD 0.040 INCH
THICK
STAINLESS STEEL, TYPE
AMS 5517
A/R
301,1/4 HARD 0.063 INCH
THICK
d. Disposition - N/A.
e. Disposition of Hazardous Materiel - N/A.
11. Special Tools, Jigs and Fixtures Required - N/A.
12. Application -
a. Category of Maintenance - AVUM. Aircraft downtime will be charged to AVUM.
b. Estimated Time Required -
(1) Total of 10 man-hours using 2 persons.
(2) Total of 2 hours downtime for one end item.
c. Estimated cost impact of stock fund items to the field -
NOMENCLATURE
PART NO
NSN
QTY
UNIT COST
TOTAL COST
CATCH CLAMPING
114P8078-6
1
0.32
0.32
LATCH ASSEMBLY
H976-7
5340-01-028-0086
1
33.81
33.81
3
Previous Page
