Inspection and Repair of Aviation Ground Power Unit (AGPU)
EXHAUST.
HYDRAULIC MODULE.
PROPULSION SYSTEM.
FUNCTIONAL INSPECTION PROCEDURES.
AGPU OPERATION.
MAINTENANCE REQUIREMENTS.
FRAME AND HOUSING.
PROPULSION.
PNEUMATIC.
STAGES OF RUST AND CORROSION.
Table 1. Technical Inspection Checklist
Table 1. Technical Inspection Checklist (Continued) - TB-1-1730-229-30-30013
Table 1. Technical Inspection Checklist (Continued) - TB-1-1730-229-30-30014
Table 1. Technical Inspection Checklist (Continued) - TB-1-1730-229-30-30015
Table 2. Functional Inspection Checklist
Table 2. Functional Inspection Checklist (Continued) - TB-1-1730-229-30-30017
Table 2. Functional Inspection Checklist (Continued) - TB-1-1730-229-30-30018
Table 3. Mandatory Replacement Parts List
Table 4. FINAL ACCEPTANCE TEST PROCEDURE (MEP 83-360A/D, NSN 1730-01-144-1897 & NSN 1730-01-466-9371)
STATIC INSPECTION
PRE-START PROCEDURE
ENGINE START
Drive Motor (Propulsion) Ramp Up and Down Operation.
Shutdown (when necessary).
PNEUMATIC SYSTEM TEST.
AC System Check.
Perform AC system check as follows:
Surge Valve Operation.
MEP-360D AC Current Limit Test.
Hydraulic System Test.
Operation at Rated Loads.
Battery Charger/Battery Charger Selector Switch Test.
ACCEPTANCE TEST COMPLETED
DA FORM 2404, EQUIPMENT INSPECTION, AND MAINTENANCE WORKSHEET.
DA FORM 2404, EQUIPMENT INSPECTION, AND MAINTENANCE WORKSHEET. (Cont)
POINTS OF CONTACT (POC).
TB-1-1730-229-30-3 Inspection and Repair of Aviation Ground Power Unit (AGPU) Part Number 83-360A Part Number 83-360D Manual
EXHAUST.
HYDRAULIC MODULE.
PROPULSION SYSTEM.
FUNCTIONAL INSPECTION PROCEDURES.
AGPU OPERATION.
MAINTENANCE REQUIREMENTS.
FRAME AND HOUSING.
PROPULSION.
PNEUMATIC.
STAGES OF RUST AND CORROSION.
Table 1. Technical Inspection Checklist
Table 1. Technical Inspection Checklist (Continued) - TB-1-1730-229-30-30013
Table 1. Technical Inspection Checklist (Continued) - TB-1-1730-229-30-30014
Table 1. Technical Inspection Checklist (Continued) - TB-1-1730-229-30-30015
Table 2. Functional Inspection Checklist
Table 2. Functional Inspection Checklist (Continued) - TB-1-1730-229-30-30017
Table 2. Functional Inspection Checklist (Continued) - TB-1-1730-229-30-30018
Table 3. Mandatory Replacement Parts List
Table 4. FINAL ACCEPTANCE TEST PROCEDURE (MEP 83-360A/D, NSN 1730-01-144-1897 & NSN 1730-01-466-9371)
STATIC INSPECTION
PRE-START PROCEDURE
ENGINE START
Drive Motor (Propulsion) Ramp Up and Down Operation.
Shutdown (when necessary).
PNEUMATIC SYSTEM TEST.
AC System Check.
Perform AC system check as follows:
Surge Valve Operation.
MEP-360D AC Current Limit Test.
Hydraulic System Test.
Operation at Rated Loads.
Battery Charger/Battery Charger Selector Switch Test.
ACCEPTANCE TEST COMPLETED
DA FORM 2404, EQUIPMENT INSPECTION, AND MAINTENANCE WORKSHEET.
DA FORM 2404, EQUIPMENT INSPECTION, AND MAINTENANCE WORKSHEET. (Cont)
POINTS OF CONTACT (POC).
TB-1-1730-229-30-3 Inspection and Repair of Aviation Ground Power Unit (AGPU) Part Number 83-360A Part Number 83-360D Manual
