CHAPTER 1. INTRODUCTION
Technical assistance.
Technical assistance. cont'd - SB-742-10013
Technical assistance. cont'd - SB-742-10014
Technical assistance. cont'd - SB-742-10015
Chapter 2 SURVEILLANCE OF AMMUNITION BY INSPECTION
Selection, inspection, and disposition of samples.
Sample disposition.
Types of inspection
Safety in storage inspection (SIS)
Special inspections (SPI)
Ammunition inspection categories and sampling plans
Surveillance defect standards.
Use of gages and precision-measuring instruments.
Condition codes
Periodic Inspection Intervals
TABLE 2-2 PERIODIC INSPECTION INTERVALS
Table 2-3. Sample Sizes and Acceptance/Rejection Numbers
Chapter 3 SURVEILLANCE OF AMMUNITION BY TESTING
Stockpile Laboratory Test Program (SLTP).
Large Caliber Stockpile Reliability Program (LCSRP)
Chapter 4 AMMUNITION QUALITY ASSURANCE PROCEDURES FOR MAINTENANCE OPERATIONS
Ammunition lot number and suffix assignment.
Ballistic test of ammunition.
Audit Checklist Preparation
Procedure C. PROCEDURES TO REVIEW AMMUNITION MAINTENANCE WORK ORDERS (MWO's)
CAR STATUS LOG
Sample CARs
CORRECTIVE ACTION REQUEST
Sample Quality Audit Check Sheet
Chapter 5 EQUIPMENT
Calibration monitoring program.
CHAPTER 6 Large Rocket and Guided Missile Ammunition
CHAPTER 7 TOXIC CHEMICAL MATERIEL
Types of Inspections.
TABLE 7-1. SMI REQUIREMENTS FOR TOXIC CHEMICAL ITEMS
Detection, isolation, and containerization cont'd - SB-742-10052
Detection, isolation, and containerization cont'd - SB-742-10053
Overpacks for TCM and Agents
Table 7-2. Approved Overpacks for Storage of Toxic Chemical Munitions
Requisitioning Procedures
Leak Testing
Table 7-3. SINGLE ROUND CONTAINER (SRC) INSPECTION CRITERIA (M55) - SB-742-10058
Table 7-3. SINGLE ROUND CONTAINER (SRC) INSPECTION CRITERIA (M55) - SB-742-10059
Leaker Report Form
Initial Operation and Detection
Gross Level Detection Methods.
Gross Level Detection Methods. cont'd
CHAPTER 8 BASIC LOAD INSPECTION (BLI) AND TECHNICAL SUPPORT ASSISTANCE
CHAPTER 9. CLASS V MATERIEL SUPPLIED TO NON-SCMA CUSTOMERS
Chapter 10 AMMUNITION SURVEILLANCE PROGRAM FOR SAFETY AND LOGISTICS FUNCTIONS
Handling, storage, and shipping operations.
Transport vehicles and vessels.
Documentation
Major Training Area Operations
Prepositioned Ships cont'd
Water Port Operations
CHAPTER 11 RECORDS AND REPORTS
Army suspension
Reports
Distribution of DSR and Ammunition Data (ADC) to Army activities
Figure 11-1. AMMUNITION LOT CLUSTER LOG
Figure 11-2. LOT CLUSTER MASTER LOG
CHAPTER 12 SECURITY ASSISTANCE PROGRAM
Materiel acceptability criteria
Special instructions. cont'd
Shipment procedures for SMCA managed materiel.
Table 12-1. Sample Size and Acceptance Criteria for FMS and GRA
CHAPTER 13 PROPELLANT AND PROPELLING CHARGES
Safety
TABLE 13-1. PROPELLANT DEFECTS CLASSIFICATION AND STANDARDS
INCIDENTAL
Ammunition Stockpile Reliability Program (ASRP)
Propellant Reassessment Program (PRP).
Selection, Preparation and shipment of Propellant dual granulation
SELECTION, PREPARATION AND SHIPMENT
Propellant on Prepositioned (PREPO AFLOAT) Ships
APPENDIX A REFERENCES
REFERENCES - SB-742-10100
APPENDIX B DSR Card Automation
APPENDIX C AMMUNITION CONDITION CODES
AMMUNITION CONDITION CODES cont'd
APPENDIX C SECTION I. LIST OF SPECIFIC ITEMS
Bombs, inspection for Helicoil Inserts
Cartridge actuated devices (CAD) and propellant actuated devices (PAD)
Cartridge, 90-mm, HEAT, M371A1 (1315-C282)
Conventional ammunition in DEMIL account
Items belonging to other services
Mine, AT Heavy M19 Non-Metallic
Projectile, 8-inch, M404.
APPENDIX E SMALL ARMS CARTRIDGES THROUGH CALIBER .50
Inspection category and sampling plan
Table E-3 Item Defects
Additional guidance for SAA
Table E-4. SAA Pull Test Requirements
Clip, cartridge, 5.56, 10 round
APPENDIX F CARTRIDGE, 60-MM MORTAR
Table F-2. Item Defects and Method of Inspection.
APPENDIX G CARTRIDGE, 81MM MORTAR
Table G-2. Item Defects and Method of Inspection
Table G-2. Item Defects and Method of Inspection. cont'd
Inspection description and notes - SB-742-10124
APPENDIX H CARTRIDGE, 105MM HOWITZER
Specific inspection points
Table H-2 Item Defects and Method of Inspection
References - SB-742-10128
APPENDIX I CARTRIDGE, 105MM APFSDS-T, M73
Table I-1. Item Defects and Method of Inspection
APPENDIX J CARTRIDGE, 105MM APFSDS-T, M774, M833 and M900
Table J-1. Equipment Identification List
Swipe (smear) test
APPENDIX K CARTRIDGE, 4.2 INCH MORTAR
Table K-2. Item Defects and Method of Inspection
Inspection description and notes - SB-742-10137
APPENDIX I CARTRIDGES, 120MM, M829, M829A1, M829A2, M830, M830A1, M856, M831A1, M829A3
Gaging and Test Requirements
TABLE L-2 PA-116 AND PA-171 SHIPPING & STORAGE CONTAINERS
TABLE L-5: CARTRIDGES, 120MM, HEAT-MP-T, M830 (C787) AND M830A1 (C791, TP-T M831A1 (C784) AND XM908 (CA05)
Inspection Description and Notes - SB-742-10143
Swipe (Smear) Test (M829, M829A1, and M829A2, Cartridges Only):
APPENDIX M LAUNCHER AND CARTRIDGE, 84MM, HE M136 (AT4)
Inspection description and notes - SB-742-10146
APPENDIX N PROJECTILE, 155MM, ICM FAMILY
Table N-3. Item Defects and Method of Inspection
Inspection description and notes cont'd
APPENDIX O PROJECTILE, 155-MM, HEAT, M712 AND M823
Table O-2. Projectile and Container Interior
APPENDIX P SMOKE GRENADES
Testing and equipment requirements
Inspection description and notes
APPENDIX Q RIOT CONTROL GRENADES
Table Q-1. Item Defects and Method of Inspection
APPENDIX R FRAGMENTATION GRENADES
Table R-2. Item Defects and Method of Inspection
APPENDIX S HAND GRENADE FUZES
Table S-1. Item Defects and Method of Inspection
Figure S-1. Safety Lever Hinge
APPENDIX T ROCKET, 3.5 INCH
Inspection description and notes - SB-742-10166
APPENDIX U ROCKET, 2.75 INCH
TABLE U-4. Warhead
Inspection Description
Repair procedures for missing/damaged end shield
APPENDIX V CHARGE, DEMOLITION, HE, LINEAR M58 SERIES AND CHARGE DEMOLITION, PRACTICE, M68 SERIES
Table V-3. Item Defects, Linear Charge M58 and M68 Series
Inspection description and notes - SB-742-10173
Figure V-1. Hose clamp torque specification
Figure V-4. Right and wrong positions of the ball end of the arming
Figure V-7 Defect classification of the L and D combination
Preissue Inspection of M58 Charges and M68
APPENDIX W CANINE EXPLOSIVE SCENT KIT
Table W-1. Item Defects and Method of Inspection
Inspection description and notes - SB-742-10181
APPENDIX X FUZES, ARTILLERY
Inspection description and notes - SB-742-10184
APPENDIX Y CARTRIDGE, 120MM MORTAR
Table Y-1. Item defects and method of inspection
Inspection description and notes.
Appendix Z. CARTRIDGES, 25mm
Inspection of linked belts.
Table Z-1 Ammunition Serviceability Criteria
Appendix AA. GRENADE, LAUNCHER, SCREENING SMOKE
Table AA-2 Defect and Method of Inspection
Appendix AB. DEFECT CODES
Appendix AB. DEFECT CODES (cont) - SB-742-10196
Appendix AB. DEFECT CODES (cont) - SB-742-10197
Appendix AB. DEFECT CODES (cont) - SB-742-10198
Appendix AC. STANDARD (NEW) AMMUNITION DEFECT CODES
CLASSIFICATION CODE DESCRIPTION:
DEFECT/SPECIAL REMARK CODE DESCRIPTIONS:
ASSEMBLY DEFECTS. CODE DESCRIPTION:
TOXIC CHEMICAL MUNITIONS. CODE DESCRIPTION:
Appendix AD. AMMUNITION CARTRIDGE, 75MM, BLANK M337 SERIES
Appendix AE. Rocket M55 GB Special Surveillance Instruction for Storage Monitoring Inspection Procedures
Sample selection
Single line sampling:
Figure AE-1. M55 ROCKET MANIFOLD
Figure AE-2. STAINLESS STEEL UNION
GLOSSARY
GLOSSARY (cont)
SB-742-1 Ammunition Surveillance Procedures Manual
Technical assistance.
Technical assistance. cont'd - SB-742-10013
Technical assistance. cont'd - SB-742-10014
Technical assistance. cont'd - SB-742-10015
Chapter 2 SURVEILLANCE OF AMMUNITION BY INSPECTION
Selection, inspection, and disposition of samples.
Sample disposition.
Types of inspection
Safety in storage inspection (SIS)
Special inspections (SPI)
Ammunition inspection categories and sampling plans
Surveillance defect standards.
Use of gages and precision-measuring instruments.
Condition codes
Periodic Inspection Intervals
TABLE 2-2 PERIODIC INSPECTION INTERVALS
Table 2-3. Sample Sizes and Acceptance/Rejection Numbers
Chapter 3 SURVEILLANCE OF AMMUNITION BY TESTING
Stockpile Laboratory Test Program (SLTP).
Large Caliber Stockpile Reliability Program (LCSRP)
Chapter 4 AMMUNITION QUALITY ASSURANCE PROCEDURES FOR MAINTENANCE OPERATIONS
Ammunition lot number and suffix assignment.
Ballistic test of ammunition.
Audit Checklist Preparation
Procedure C. PROCEDURES TO REVIEW AMMUNITION MAINTENANCE WORK ORDERS (MWO's)
CAR STATUS LOG
Sample CARs
CORRECTIVE ACTION REQUEST
Sample Quality Audit Check Sheet
Chapter 5 EQUIPMENT
Calibration monitoring program.
CHAPTER 6 Large Rocket and Guided Missile Ammunition
CHAPTER 7 TOXIC CHEMICAL MATERIEL
Types of Inspections.
TABLE 7-1. SMI REQUIREMENTS FOR TOXIC CHEMICAL ITEMS
Detection, isolation, and containerization cont'd - SB-742-10052
Detection, isolation, and containerization cont'd - SB-742-10053
Overpacks for TCM and Agents
Table 7-2. Approved Overpacks for Storage of Toxic Chemical Munitions
Requisitioning Procedures
Leak Testing
Table 7-3. SINGLE ROUND CONTAINER (SRC) INSPECTION CRITERIA (M55) - SB-742-10058
Table 7-3. SINGLE ROUND CONTAINER (SRC) INSPECTION CRITERIA (M55) - SB-742-10059
Leaker Report Form
Initial Operation and Detection
Gross Level Detection Methods.
Gross Level Detection Methods. cont'd
CHAPTER 8 BASIC LOAD INSPECTION (BLI) AND TECHNICAL SUPPORT ASSISTANCE
CHAPTER 9. CLASS V MATERIEL SUPPLIED TO NON-SCMA CUSTOMERS
Chapter 10 AMMUNITION SURVEILLANCE PROGRAM FOR SAFETY AND LOGISTICS FUNCTIONS
Handling, storage, and shipping operations.
Transport vehicles and vessels.
Documentation
Major Training Area Operations
Prepositioned Ships cont'd
Water Port Operations
CHAPTER 11 RECORDS AND REPORTS
Army suspension
Reports
Distribution of DSR and Ammunition Data (ADC) to Army activities
Figure 11-1. AMMUNITION LOT CLUSTER LOG
Figure 11-2. LOT CLUSTER MASTER LOG
CHAPTER 12 SECURITY ASSISTANCE PROGRAM
Materiel acceptability criteria
Special instructions. cont'd
Shipment procedures for SMCA managed materiel.
Table 12-1. Sample Size and Acceptance Criteria for FMS and GRA
CHAPTER 13 PROPELLANT AND PROPELLING CHARGES
Safety
TABLE 13-1. PROPELLANT DEFECTS CLASSIFICATION AND STANDARDS
INCIDENTAL
Ammunition Stockpile Reliability Program (ASRP)
Propellant Reassessment Program (PRP).
Selection, Preparation and shipment of Propellant dual granulation
SELECTION, PREPARATION AND SHIPMENT
Propellant on Prepositioned (PREPO AFLOAT) Ships
APPENDIX A REFERENCES
REFERENCES - SB-742-10100
APPENDIX B DSR Card Automation
APPENDIX C AMMUNITION CONDITION CODES
AMMUNITION CONDITION CODES cont'd
APPENDIX C SECTION I. LIST OF SPECIFIC ITEMS
Bombs, inspection for Helicoil Inserts
Cartridge actuated devices (CAD) and propellant actuated devices (PAD)
Cartridge, 90-mm, HEAT, M371A1 (1315-C282)
Conventional ammunition in DEMIL account
Items belonging to other services
Mine, AT Heavy M19 Non-Metallic
Projectile, 8-inch, M404.
APPENDIX E SMALL ARMS CARTRIDGES THROUGH CALIBER .50
Inspection category and sampling plan
Table E-3 Item Defects
Additional guidance for SAA
Table E-4. SAA Pull Test Requirements
Clip, cartridge, 5.56, 10 round
APPENDIX F CARTRIDGE, 60-MM MORTAR
Table F-2. Item Defects and Method of Inspection.
APPENDIX G CARTRIDGE, 81MM MORTAR
Table G-2. Item Defects and Method of Inspection
Table G-2. Item Defects and Method of Inspection. cont'd
Inspection description and notes - SB-742-10124
APPENDIX H CARTRIDGE, 105MM HOWITZER
Specific inspection points
Table H-2 Item Defects and Method of Inspection
References - SB-742-10128
APPENDIX I CARTRIDGE, 105MM APFSDS-T, M73
Table I-1. Item Defects and Method of Inspection
APPENDIX J CARTRIDGE, 105MM APFSDS-T, M774, M833 and M900
Table J-1. Equipment Identification List
Swipe (smear) test
APPENDIX K CARTRIDGE, 4.2 INCH MORTAR
Table K-2. Item Defects and Method of Inspection
Inspection description and notes - SB-742-10137
APPENDIX I CARTRIDGES, 120MM, M829, M829A1, M829A2, M830, M830A1, M856, M831A1, M829A3
Gaging and Test Requirements
TABLE L-2 PA-116 AND PA-171 SHIPPING & STORAGE CONTAINERS
TABLE L-5: CARTRIDGES, 120MM, HEAT-MP-T, M830 (C787) AND M830A1 (C791, TP-T M831A1 (C784) AND XM908 (CA05)
Inspection Description and Notes - SB-742-10143
Swipe (Smear) Test (M829, M829A1, and M829A2, Cartridges Only):
APPENDIX M LAUNCHER AND CARTRIDGE, 84MM, HE M136 (AT4)
Inspection description and notes - SB-742-10146
APPENDIX N PROJECTILE, 155MM, ICM FAMILY
Table N-3. Item Defects and Method of Inspection
Inspection description and notes cont'd
APPENDIX O PROJECTILE, 155-MM, HEAT, M712 AND M823
Table O-2. Projectile and Container Interior
APPENDIX P SMOKE GRENADES
Testing and equipment requirements
Inspection description and notes
APPENDIX Q RIOT CONTROL GRENADES
Table Q-1. Item Defects and Method of Inspection
APPENDIX R FRAGMENTATION GRENADES
Table R-2. Item Defects and Method of Inspection
APPENDIX S HAND GRENADE FUZES
Table S-1. Item Defects and Method of Inspection
Figure S-1. Safety Lever Hinge
APPENDIX T ROCKET, 3.5 INCH
Inspection description and notes - SB-742-10166
APPENDIX U ROCKET, 2.75 INCH
TABLE U-4. Warhead
Inspection Description
Repair procedures for missing/damaged end shield
APPENDIX V CHARGE, DEMOLITION, HE, LINEAR M58 SERIES AND CHARGE DEMOLITION, PRACTICE, M68 SERIES
Table V-3. Item Defects, Linear Charge M58 and M68 Series
Inspection description and notes - SB-742-10173
Figure V-1. Hose clamp torque specification
Figure V-4. Right and wrong positions of the ball end of the arming
Figure V-7 Defect classification of the L and D combination
Preissue Inspection of M58 Charges and M68
APPENDIX W CANINE EXPLOSIVE SCENT KIT
Table W-1. Item Defects and Method of Inspection
Inspection description and notes - SB-742-10181
APPENDIX X FUZES, ARTILLERY
Inspection description and notes - SB-742-10184
APPENDIX Y CARTRIDGE, 120MM MORTAR
Table Y-1. Item defects and method of inspection
Inspection description and notes.
Appendix Z. CARTRIDGES, 25mm
Inspection of linked belts.
Table Z-1 Ammunition Serviceability Criteria
Appendix AA. GRENADE, LAUNCHER, SCREENING SMOKE
Table AA-2 Defect and Method of Inspection
Appendix AB. DEFECT CODES
Appendix AB. DEFECT CODES (cont) - SB-742-10196
Appendix AB. DEFECT CODES (cont) - SB-742-10197
Appendix AB. DEFECT CODES (cont) - SB-742-10198
Appendix AC. STANDARD (NEW) AMMUNITION DEFECT CODES
CLASSIFICATION CODE DESCRIPTION:
DEFECT/SPECIAL REMARK CODE DESCRIPTIONS:
ASSEMBLY DEFECTS. CODE DESCRIPTION:
TOXIC CHEMICAL MUNITIONS. CODE DESCRIPTION:
Appendix AD. AMMUNITION CARTRIDGE, 75MM, BLANK M337 SERIES
Appendix AE. Rocket M55 GB Special Surveillance Instruction for Storage Monitoring Inspection Procedures
Sample selection
Single line sampling:
Figure AE-1. M55 ROCKET MANIFOLD
Figure AE-2. STAINLESS STEEL UNION
GLOSSARY
GLOSSARY (cont)
SB-742-1 Ammunition Surveillance Procedures Manual
