SECTION IV--INSTALLATION

TB 1-2840-248-20-2

(j) Preparation Instructions For Completion of Copies 3, 1 and 2 of a DA Form 2410 For an

NSN/PN/Serial No. Change of an Uninstalled Item (Figure 8). Discard copy 2 of the original or existing DA

Form 2410. Complete copy 3 of the existing DA Form 2410 on the item.

COPY 3--SECTION IV--INSTALLATION (Figure 8, Sheet 1 of 3) Block 41. Installed on (nomen NHA).

Enter "uninstalled".

Blocks 42 through 51. Leave these blocks blank.

Block 52. Date installed. Enter the julian date the changes to the national stock number, part number or

serial number in Section IV are completed.

Block 53. UIC (this action). Enter the unit identification code for the activity that determined the

NSN/PN/Serial number is to be changed. If a contractor enter your Cage code prefixed with a "IK".

Block 54. Manhrs (to install). Leave this block blank.

Block 55. Signature and telephone number. The person who completes this form will sign in this block and

enter their telephone number (DSN/AUTOVON or commercial).

Block 56. New - NSN/PN/SN. Enter the new national stock number, part number and serial number of the

item.

Block 36. Inspection & action codes. Enter a "C" in the box in front of the (C) MWO due block. Line out

any other entries in block 36. Also, line out entries in block 10 and enter the code MW3.

Block 57. Reason for loss code. Enter "M" in this block, see Table 1-15 of DA Pamphlet 738-751 at the end

of chapter 1 for equipment loss codes.

Blocks 58 through 62. Leave these blocks blank.

NOTE: When copy 3 of the existing DA Form 2410 is completed, start a new DA Form 2410. Do not change

the control number of the new form.

COPY 1--SECTION I--IDENTIFICATION (Figure 8, Sheet 2 of 3)

Block 1. Nomenclature. Enter the item name.

Block 2. NSN. Enter the new national stock number of the item shown in block 56 of the old copy 3, DA

Form 2410.

Block 3. Part number. Enter the new part number of the item shown in block 56 of the old copy 3, DA

Form 2410.

Blocks 4 through 13. Copy this information from copy 3 of the old DA Form 2410.

SECTION II--REMOVAL DATA.

Block 14. Removed from (Nomen NHA). Enter "uninstalled" in this block.

Blocks 15 through 24. Leave these blocks blank.