TB 1-1730-229-30-03
h. BASIC ISSUE ITEMS. The following items if provided with each AGPU shall be repaired or
replaced as required: hydraulic spacer plate, dual service manifold, hydraulic adapter hose
assemblies (two each 2' and 30' hoses with fittings and 4 each 10' hoses with fittings), hydraulic
fill tube, engine crankcase fill and drain tube hose assembly (Hose Assembly -- Oil Drain for
Engine P/N DB75-48-TEDESLO), log book with records and all forms (Ref. DA PAM 750-8, par.
2-7 through 2-11), and De-Icing and Chinook Hose Kit. A functional 5 pound carbon dioxide fire
extinguisher shall be provided.
i. FRAME AND HOUSING.
(1)
Replace acoustic insulation panels and roof seals as required.
(2)
Repair any welds or broken attaching hardware to frame and/or housing as required.
(3)
Clean and inspect all sub-structure and mounting points for sub-components.
j. BATTERY. If not installed, install new Optima batteries IAW TB 1-1730-229-30-2, "Authorized
Modification of Battery Installation."
"Inspection and Replacement of Exhaust Installation."
l. FUEL TANK.
(1)
Fuel tank shall be inspected and removed and cleaned as required.
(2)
All filters, o-rings, and gaskets shall be replaced. All hoses shall be replaced as required.
Screen strainers shall be cleaned or replaced.
m. ENGINE.
(1)
If not installed, install fuel filter/separator IAW TB 1-1730-229-20-1.
(2)
Inspect and clean combustion chamber and fuel nozzle assembly IAW TM 55-1730-229-12
and TM 55-1730-229-34. A cracked combustion chamber may be repaired IAW DMWR 1-
2835-213.
(3)
Fuel nozzle shall be checked and cleaned; replace as required.
(4)
Replace igniter plug assembly IAW TM 55-1730-229-12 and TM 55-1730-229-34.
(5)
Replace oil and oil fuel filters. Clean or replace strainers IAW TM 55-1730-229-12 and TM
55-1730-229-34.
(6)
Replace thermocouple IAW TM 55-1730-229-12 and TM 55-1730-229-34.
(7)
Inspect GTE hour meter for broken glass and mounting hardware. Repair or replace as
required.
(8)
Clean Air Cleaner Assembly IAW TM 55-1730-229-12 and TM 55-1730-229-34.
n. HYDRAULIC.
(1)
The Hydraulic Module shall be removed, inspected, and serviced IAW TM 55-1730-229-12
and TM 55-1730-229-34.
8
Previous Page
