TB 1-2840-248-20-2
the root cause for failure may be found to be different than that observed at time of removal. The
overhaul/repair facility will enter the actual failure code in this block. See Table 1-2, 1-3, or 1-4 in DA
Pamphlet 738-751 at the end of chapter 1 for selection of the actual failure code. Line through the failure code
in block 10, copy 2 and 3 after repair, overhaul, rebuild, or inspection and enter "SC1". Condition status and
other data of the item after repair, overhaul, rebuild or inspection as indicated in blocks 10 and 36, copy 2 and
3, will be annotated on the materiel condition tag/label (DD Form 1574/1574-1) and attached to the reportable
item.
Remarks block. Enter the contract number authorizing repair of the item entered in block 1, if applicable.
Provide brief pertinent remarks for the action checked in block 36.
NOTE: After all needed entries are completed on copy 2 front and backside mail the form to USAATCOM.
Update copy 3 blocks 36, 6, 7, 9, 10, and REMARKS (same as copy 2) then ship with the serviceable
component/module.
14
Previous Page
