SB 742-1
G
Non-standard configuration, for non-standard test or
13
Hermetic seal broken.
training use only. (Not used with standard
14
Extraneous markings.
configuration items.) (See Note 1)
15
Expended; retained for maintenance, reclamation or
H
Not cleared for overhead fire. (See Note 2)
disposal.
I
(Not used)
1X
Other/unidentified in-service defect or condition.
J
Limited remaining shelf-life/service life. Used when
ENVIRONMENTAL/EXPOSURE DEFECTS OR CONDITIONS.
remaining life is a Condition Code determinant.
CODE DESCRIPTION:
Z
No classification code applies.
20
Expired (shelf-life, service life, MDD, etc.).
NOTES:
21
Requires replacement of desiccant and humidity
(1) Used when classification is directed by authority
indicator.
other than TB 9-1300-385 (Army), NAVSUP P 801 (Navy) or
22
Wet/excessive moisture (rain/condensation).
TO 11A-1-1 (Air Force).
(2) Used when restriction is specified in appendices to 23
Oxidation (rust), corrosion or verdigris.
24
Salt-water wet-down or salt spray exposure, or salt
NAVSUP P 801 (Navy) or TB 9-1300-385 (Army).
water damage.
DEFECT/SPECIAL REMARK CODE DESCRIPTIONS:
25
Deteriorated, weathered.
NOTE: The first character identifies the general type of defect 26
Shelf life to expire in 1 year or less.
or Special remark as follows:
27
Exuding/hydrogen gas buildup.
0-
Safety defects or unsafe conditions.
28
Marking Illegible.
1-
In-service defects or conditions.
29
Marking faded.
2-
Environmental/exposure defects or conditions.
2A
Service life expired.
3-
Test defects.
2B
Shelf life expired.
4-
Inspection defects (other than visual).
2C
Greater than 30 percent RH.
5-
Assembly defects.
2D
Greater than 40 percent RH.
6-
Physical damage.
2E
Greater than 50 percent RH.
7-
Processing deficiencies.
2F
Wet pack.
8-
Special remarks.
2G
Blue bag with loss of tensile strength.
9-
Toxic chemical munitions.
2H
Blue bag without loss of tensile strength.
2N
Caked igniters (black powder only).
WARNING
2P
Dry rot (packing).
THE FOLLOWING CODES FOR SAFETY DEFECTS OR
UNSAFE CONDITIONS APPLY WHEN DEFECTS OR
2Q
Overhaul cycle exceeded.
CONDITIONS EXIST WHICH CONSTITUTE HAZARDS
2X
Other/unidentified environmental/exposure defect or
TO PERSONNEL, FACILITIES OR EQUIPMENT
condition.
DURING HANDLING, STORAGE, PROCESSING OR
TEST DEFECTS. CODE DESCRIPTION:
TRANSPORTATION, AND WHICH REQUIRE SPECIAL
HANDLING, TREATMENT AND/OR ATTENTION.
30
Failed torque test.
00
UNSAFE - Lethal fluid, substance or agent 31
Failed air pressure test.
leak/contamination.
32
Failed hydraulic test.
01
UNSAFE - Unstable (explosive, propellant, chemical).
33
Failed electronic/electrical test.
02
UNSAFE - Combustible (non-lethal) fluid or 34
Failed systems test.
substance leak.
35
Failed Test-In-Test (BIT).
03
UNSAFE - Cracked/ruptured explosive/propellant
36
Failed life/stockpile reliability/ surveillance function
case.
test.
04
UNSAFE - Explosive exudate/residue/contamination.
37
Failed mechanical test.
05
UNSAFE - Armed.
38
Failed chemical test.
06
UNSAFE
-
Safety
fitting/fixture/accessory
39
Failed non-destructive test/examination (NDT/NDE)
missing/damaged.
(radiographic, ultrasonic, magnetic particle, eddy
07
UNSAFE - Dropped (exceeding safe drop limits).
current, magnaflux, dye-penetrant).
08
UNSAFE - Misfire/hangfire.
3A
Failed environmental test.
09
UNSAFE - Toxic (non-lethal, non-combustible) 3B
Functional code downgrade.
fluid/substance leak/contamination.
3C
Propellant stability Cat C.
0A
UNSAFE - Unstable/insecure unit load.
3D
Propellant stability Cat D.
0X
UNSAFE - Other/unidentified safety defect/unsafe
3F
Failed radiographic inspection.
condition.
3G
Failed ultrasonic test.
IN-SERVICE
DEFECTS
OR
CONDITIONS.
CODE 3H
Failed eddy current test.
DESCRIPTION:
3J
Failed dye penetrant test.
10
Captive flown.
3K
Failed magnetic particle test.
11
Ready Service.
3L
Failed magnaflux testing.
12
In-water run.
3M
Quantity of tracers in lot too small for trace test.
AC-3
Previous Page
