SB 742-1
Classification
Application
Inspection
Inspection
Method
Description
1. Critical:
a. Safety pin missing or broken
All
Visual
b. Safety pin is insecurely assembled to an extent that it
All
Visual
endangers the user
c. Incorrect model fuze assembled to grenade
All
Visual
d. Grenade packed upside down in fiber or metal container
All
Visual
e. Safety clip (where applicable) missing or improperly
All
Visual
positioned
f. Either or both lever hinge ears missing
All
Visual
g. Both lever hinge ears not bent away from the body past
All
Visual
the vertical center line of the body hinge bosses
h. Ends of both lever hinge ears not bent upwards
All
Visual
i. Grenades mixed within the lot which can result in hazard-
All
Visual
ous or unsafe conditions for persons using or maintaining
items
j. Marking misleading as to grenade type
All
Visual
2. Major:
a. Cracks in neck area of grenade
All
Visual
b. Lot number missing or illegible
All
Visual
c. Pull ring is missing but safety pin is securely assembled
All
Visual
d. Pull ring is damaged to the extent that the safety pin
All
Visual
cannot be easily extracted
e. Rust or corrosion to the extent that the grenade cannot be
All
Visual
used as intended
f. Any movement of fuze at torque values of less than 26
All
Visual/Manual
inch-pounds
g. Grenade loose in containers to the extent items cannot be
All
Visual
adequately protected in transit
h. Either lever hinge ear not bent away from the body past
All
Visual
the vertical center line of the body hinge boss
i. End of either lever hinge ear not bent upwards
All
Visual
j. Improperly assembled, seated, or loose fuze
All
Visual
3. Minor:
a. Paint defects (i.e., scale, peeling, blistering, etc.)
All
Visual
b. Layers of flaked rust which leaves pitting when removed
All
Visual/Manual
but does not affect functioning
c. Marking of grenade incomplete or illegible but type of
All
Visual
grenade and lot number are identifiable
d. Inadequate paint coverage
All
Visual
e. Missing gasket between fuze and neck of grenade
All
Visual